Liquitex Satin Varnish 237 ml

What it does

    100% acrylic polymer varnish adds a satin sheen, protects and resists dirt retention
    Dries clear to a flexible, non-tacky, hard surface
    Increases brightness and colour saturation
    Adjusts and unifies surface sheen
    Improves surface durability - ideal when shipping or exhibiting
    Protects colours from UV light damage
    Resists discolouration - yellowing and fogging - caused by humidity, heat and UV
    Depending on the substrate it allows surface moisture to pass through and breathe
    Allows for easy cleaning without fear of damaging the acrylic paint film
    Has excellent levelling properties - will not hold brush marks
    Semi-opaque when wet, transparent when dry
    Use on flexible or rigid supports
    Designed for interior and exterior use

How to use it

    As this is permanent, do a patch test first
    Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness)
    Ensure your space is well ventilated and dirt and dust-free
    Place the artwork flat on a surface - always varnish horizontally
    Stir gently before use
    Use long, even strokes, covering the surface top to bottom while moving from one side to the other - don't go over bits you have missed, but leave to dry and then the re-varnish area
    While applying, look for surface bubbles and even them out immediately
    Apply 1-2 thin coats, allowing at least three hours dry time between coats
    If you require more than two layers, first use Gloss Varnish as a base layer and build to your desired thickness, then apply Satin Varnish as your topcoat

How not to use it

    Do not shake or vigorously over-brush as this can result in surface bubbles and a foggy, hazy look when dry
    Don't apply with a roller or sponge brush
    Do not thin with water
    Don't apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness
    Don't go back over areas you have already done, as this can cause clouding
    Don't attempt to remove once applied
    Do not use with any non-acrylic media